top of page

We widely use liquid polystyrene concrete in our industry.

We fill and insulate with heat-insulating monolithic polystyrene concrete: floors, roof, walls, interfloor ceilings, well masonry, attics, underground water storages, industrial refrigerators, hangars, warehouses, heating mains. We make a coupler on any objects with liquid polystyrene concrete. We build houses from monolithic heat-insulating polystyrene concrete of any density

Why do we use polystyrene concrete?

- Polystyrene concrete is very “warm’ material. Thermal conductivity of polystyrene concrete is 0,05-0,15 Wt/(м·°C). It is used as a insulation

- Polystyrene concrete has a great sound-isolating features. Polystyrene particles dampen vibrations and have sound-absorbing properties

- Weather resistance. Even without additional stabilizers, polystyrene concrete has an ideal resistance to ultraviolet radiation and external atmospheric factors. In the atmospheric testing laboratory, samples of polystyrene concrete showed no loss of strength even after 950 freeze and thaw cycles

- Low water absorption determines the excellent dimensional stability of products cast from polystyrene concrete.

- Under pressure, cracks and chips do not appear. Based on this property, the material is used for floors

- Polystyrene concrete is a very light material. A block measuring 60 × 30 × 20 cm weighs 5-6 kg. The same volume of brick weighs more than 60 kg! Light weight greatly simplifies construction work

- Polystyrene concrete is a safe, environmentally friendly material. It does not burn and does not emit toxins.

Why do we use the monolithic polystyrene concrete?

- The walls for the house with the size 8x9 square m can be built during 2 days. The entire construction with finishing putty can take approximately 2 months. The walls are very strong, withstand high loads

- The small load of monolithic polystyrene concrete lets to make the building light or use it on the built object without making it hard

- The usage term of the roof with the use of monolithic polystyrene concrete is in some times more than with the classic ones

- Highest sound-isolating and warm-isolating features with the provision of air exchange

- Resistant to rot and rodents

- Provides the corrosion protection to metal fittings

- Provides homogeneity of the material over the entire area of the pouring No seams

- Possibility of application at any thickness in the project according to thermal requirements

- It is a good heat-insulating material and does not require additional insulation

- The material is used instead of a cement screed, self-leveling floor.

- It is also used to fill voids in masonry, underground walls, insulation in hollow blocks, ideal for volumetric and any other filling where high insulating properties are required.

Monolithic polystyrene concrete helps owners save on paying bills for heat, gas or electricity!

bottom of page